ХЕМЗ

Electricmotors

The electric motors are intended as a drive of centrifugal pumps used for pumping out formation fluid (oil, associated water and associated gas) from oil wells with deflection angle in the place of suspension not more than 60°.

Medium where electric motors are to be operated

Parameter Unit of measurement Value
Maximum ambient temperature °С 135
Maximum hydrostatic pressure in the neighborhood of electric motor kgf/cm2 400
Maximum mass concentration of solid particles (with relative hardness not more than 5 points by Mohs scale) g/l 1
Maximum concentration of hydrogen sulfide g/l 0,01

Note: On the Customer's request, special versions of electric motors may be manufactured – motors for maximum ambient temperature of 150°С, as well as corrosion-resistant motors.

Types and technical characteristics of electric motors

The standard types of electric motors (sections) and their main technical parameters are pointed out in the table below.

On the Customer's request, the electric motors may be manufactured in heat-resistant version, increased heat-resistant version, with telemetry system or with possibility of connection of telemetry system “Electon-TMS”, “SKAD-2002-SKS”, “IRZ TMS”, “TM-01-03” and others (without replacement of electric motor housing parts).

 

Electric motor
(section) type
Power, kW Voltage, V Current, A
One-section (single) electric motors with housing diameter of 103 mm
ED22-103 22 690 27,5
ED28-103 28 870 28
ED32-103 32 1000 27,5
ED32-103М1 32 870 32
ED40-103 40 1020 34
ED45-103 45 1050 37
ED50-103 50 1350 32
ED56-103 56 1400 35
ED63-103М1 63 1400 40
Two-section and three-section electric motors with housing diameter of 103 mm
ED32-103V 31,5 870 32
ED32-103N 880
Assembled 63 1750
ED35-103V 35 915 32
ED40-103N 40 1060
Assembled 75 1975
ED45-103V 45 1075 35,5
ED45-103N
Assembled 90 2150
ED45-103М1V 45 980 39
ED45-103М1N 990
Assembled 90 1970
ED36-103V 36 605 51
ED36-103S
ED38-103N 38 640
Assembled 110 1850
ED41-103V 41,1 625 57
ED41-103S
ED41-103N 42,7 650
Assembled 125 1900
ED63-103М1V 62,5 980 56
ED63-103М1N 1000
Assembled 125 1980
ED47-103V 47 733 56
ED47-103S
ED47-103N
Assembled 140 2200
One-section (single) electric motors with housing diameter of 117 mm, with closed slot
ED22-117М5 22 720 24
ED28-117М5 28 910 24,5
ED32-117М5 32 1050 24,5
ED36-117М5 36 1240 23,5
ED40-117М5 40 1280 25
ED45-117М5 45 1450 25
ED50-117М5 50 1600 25
ED56-117М5 56 1820 24,5
ED63-117М5 63 2000 25
ED63-117М5М1 63 1400 36
ED70-117М5 70 2150 26
ED80-117М5 80 2010 32
ED90-117М5 90 1900 38
ED90-117М5М1 90 2170 33
ED100-117М5 100 2060 39
ED110-117М5 110 1910 46
ED125-117М5 125 2220 46
Two-section electric motors with housing diameter of 117 mm, with closed slot
ED70-117М5V 70 1070 52
ED70-117М5N 1100
Assembled 140 2170
ED80-117М5V 80 1000 63
ED80-117М5N 1020
Assembled 160 2020
ED90-117М5V 90 935 76
ED90-117М5N 965
Assembled 180 1900
ED100-117М5V 100 1000 79
ED100-117М5N 1030
Assembled 200 2030
ED110-117М5V 110 1100 80
ED110-117М5N 1130
Assembled 220 2230
ED125-117М5V 125 1240 80
ED125-117M5N 1290
Assembled 250 2530
One-section (single) electric motors with housing diameter of 123 mm
ED90-123М3 90 2150 33
ED90-123 90 1980 36
ED100-123 100 2130 37
ED125-123 125 2150 46
ED160-123 160 2550 50
Two-section electric motors with housing diameter of 123 mm
ED90-123V 90 960 74
ED90-123N 1000
Assembled 180 1960
ED100-123V 100 1040 75
ED100-123N 1060
Assembled 200 2100
ED125-123V 125 1220 80
ED125-123N 1240
Assembled 250 2460
ED160-123V 160 1460 86
ED160-123N 1490
Assembled 320 2950